Bright surface 304 stainless steel sheet BA 8K PVC protective film Finishing
Bright 304 stainless steel sheet is a stainless steel material with specific surface treatment and performance characteristics.
BA (Bright Annealing) : refers to bright annealing, that is, a surface state of stainless steel cold-rolled sheet after bright annealing treatment and then leveling. This surface treatment makes the plate have a high gloss and smoothness, and the appearance is bright as a mirror.
8K: also known as mirror board, it is polished on the basis of BA or 2B, so that the surface is more bright, looks like a mirror, and can clearly reflect the object, so it is called "mirror board". 8K plates produced by different factories may differ in terms of surface brightness, roughness and defect state, but in general, the surface quality of 8K plates is high and has good decoration.
Performance advantages
Corrosion resistance:
Contains 18% chromium and 8% nickel, which makes it have good antioxidant and corrosion resistance in various environments, and can resist the erosion of chemical media such as acids, alkalis, and salts. For example, in the daily kitchen environment, it can effectively resist the corrosion of the plate by the acid and alkali components in the food.
Processing performance:
It has good plasticity and toughness, and is easy to perform various processing operations, such as cutting, stamping, bending, etc., and can meet the design requirements of different shapes and structures. For example, it can be processed into various kitchen utensils, tableware, architectural decorative components, etc.
Mechanical strength: It has high strength and can withstand certain loads and stresses to ensure stability and safety during use.
Welding performance:
It has good welding performance and is suitable for connection and assembly by welding. It is more commonly used in the manufacture of large structural parts or complex equipment.
Cleanliness and hygiene: The surface is smooth, not easy to accumulate dirt, and easy to clean, which is conducive to keeping the surface clean and hygienic. Therefore, it is widely used in food processing, medical equipment and other fields with high
hygiene requirements.
Exquisite appearance: After BA and 8K treatment, it has very high gloss and beauty, which can improve the grade and visual effect of the product. It is suitable for occasions with high requirements on appearance, such as decoration of high-end buildings, production of luxury furniture, etc.
PVC protective film:
Adding PVC protective film to the surface of bright 304 stainless steel sheet mainly plays the following roles:
Protect the surface: Prevent the surface of the sheet from being scratched, worn, polluted, etc. during processing, transportation, installation, etc., and maintain the surface quality and gloss of the sheet.
Prevent corrosion: Isolate corrosive substances from the outside, such as moisture, oxygen, acid and alkali, etc., to avoid corrosion on the surface of stainless steel and extend the service life of the sheet.
Easy to clean: Even if there are some stains or dust on the surface of the protective film, it is relatively easy to wipe and clean, and will not affect the surface of the sheet.
Convenient construction: During the installation process, the protective film can play a certain anti-slip role, which is convenient for construction personnel to operate. At the same time, after the installation is completed, the protective film can be torn off to keep the stainless steel surface in a brand new state.
Technical Parameters
| Product Name | 304L Stainless Steel Sheet/Plate |
| Thickness | 0.30~150mm |
| Width | 1000mm,1219mm,1500mm,1800mm,2000mm,etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Standard | ASTM GB/T JIS4 ASME BS DIN EN |
| Material | 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc. |
| Brand Name | EDEST,TISCO, BAO STEEL, ZPSS |
| Technique | Hot Rolled And Cold Rolled |
| Surface | 2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror,checkered,embossed,hair line, sand blast, Brush, etching, etc |
| Price Term | Ex-Work, FOB, CNF, CFR, CIF, etc |
Stainless steel composition content
| stainless steel composition content |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 304 | ≤0.08 | ≤2 | ≤0.75 | ≤0.045 | ≤0.03 | 18-20 | | 8-10.5 | ≤0.1 |
| 304L | ≤0.03 | ≤2 | ≤1 | ≤0.045 | ≤0.03 | 18-20 | | 9-11 | |
| 304H | 0.04-0.1 | ≤2 | ≤0.75 | ≤0.045 | ≤0.03 | 18-20 | | 8-10.5 | |
| 316 | ≤0.08 | ≤2.00 | ≤1.00 | ≤0.035 | ≤0.03 | 16.0-18.5 | 2.0-3.0 | 10.0-14.0 | |
| 321 | ≤0.08 | ≤2.00 | ≤0.75 | ≤0.75 | ≤0.03 | 7.00-19.0 | | 9.00-12.00 | |
Product Tags:
|
|
Bright Surface 304 Stainless Steel Sheet BA 8K PVC Protective Film Finishing Images
|
